Product FAQ for SEENDA BSE-100

Supports 3.5mm audio jack, USB, SD/TF card, and Bluetooth connection. You can switch between these connection modes by pressing the MODE button on the top of the speaker or by long-pressing the MODE button on the remote control. The speaker will announce the current connection mode after switching.

Bluetooth Connection:

The speaker defaults to Bluetooth connection upon power-on. You can also switch to Bluetooth mode during use by long-pressing the MODE button, then find and connect to the speaker on your device.

Other Connection Methods:

Plug-and-play.

Try using a different charging cable to check whether the charging indicator light turns on. Please make sure to turn off the speaker/microphone when charging, otherwise it may cause noise and affect the charging process. Be sure to use the Type-C charging port.

Try using a different charging cable to check whether the charging indicator light turns on. Please make sure to turn off the speaker when charging, otherwise it may cause noise and affect the charging process.

The microphone has an internal replaceable battery. If the microphone is not working, first try using a different charging cable. Alternatively, you can replace the internal battery by rotating the lower part of the microphone. The battery model is Lithium Battery 18650.

This button has no actual function. The microphone also has volume up/down buttons for adjusting the microphone volume.